Lorex L114V251 Manuel d'instructions télécharger pdf (Page 29)

Using the Setup Menu

Record

Set record speed, quality, record schedule and

recording duration for triggered events.

Figure 12.0 Record Menu

To configure record settings:

1. From the Setup Menu, select Record and

press

. The Record menu opens.

2. Select the following options and press

 to configure settings:

• Record Speed:

Select channels 1~4 and press  to

set the frames per second (FPS) for

each channel. NTSC: by default, 15 fps;

max. 60 fps. PAL: by default, 12 fps,

max. 50 fps.

Figure 12.1 Record Speed menu

• Record Quality:

Set as Normal, High, or Highest.

• Event Rec Duration:

Event Record Duration is the length of

time the system will record when motion

is detected on a selected camera. Set

from 5, 10, 15, 20, 25, or 30 seconds (by

default, 10 seconds).

• Record Schedule:

Press  to select each hour from

0~23. Press

 to set the record

method (Red=Time/Continuous

Recording, Green=Motion Recording,

Grey=No recording).

Note: In order to use Manual Recording,

you must apply "No Recording" to a selected

hour block in the record Schedule.

Figure 12.2 Record Schedule

3. Press until the Exit menu appears.

Select Save & Exit and press to

save your settings.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 53 54

Pas de commentaire

Lorex L114V251 Manuel d'instructions Page 29