Lorex L114V251 Manuel d'instructions télécharger pdf (Page 15)

Installing Cameras

Connecting BNC Cameras

Use a BNC/Power extension cable (not

included) to connect your BNC cameras to a

monitor,

Figure 5.0 Male and female ends of BNC/Power extension cable

DVR, or observation system and

power source.

To connect the extension cable:

1. Connect the extension cable to the

camera:

• Connect the BNC cable to the camera.

• Connect the power cable (male) to the

camera.

2. Connect the extension cable to the DVR/

monitor/observation system:

• Connect the BNC cable to BNC port (female) on the DVR.

• Connect the power cable to a power adaptor.

ATTENTION - The ends of the extension cable are NOT THE SAME: one end has a male

connector and the other end has a female connector. Before permanaently running the

cable, make sure you have oriented the extension cable correctly between the camera and

the DVR, monitor, or observation system.

Power cable—male: Connect the male

power cable to the camera.

Power cable—female: Connect the

female power cable to the power adaptor.

Camera Connections

Figure 5.1 Full connectivity diagram

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

Pas de commentaire

Lorex L114V251 Manuel d'instructions Page 15